Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
12 Month Financing: For a limited time, purchase $599 or more using the Amazon.com Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.

Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other.
I'm revising my 1 Star review due to Puroma's excellent Customer Service. I sent them an email and also left a 1 Star review when my first order came in as 2 faulty locks. They were quick to respond and immediately sent me 2 brand new locks that work perfectly. I haven't had enough time to test the new locks but here's hoping they last for a good amount of time. Thanks, Puroma!
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.
Students and their parents are responsible for, and will be charged for, any damage to or loss of school property that may result through the use of lockers. This includes any loss as a result of vandalism. Lockers have been subject to weekend and after school vandalism. The school will not replace any personal property brought to school or placed in lockers. 

Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Convenient storage space, plus a bench for children to sit while putting on shoes or boots! Constructed with all-birch veneer panels with dado construction for added strength and durability, and screw block reinforced top panels. Unit is protected with 4 coats of environmentally friendly, chemical and stain resistant, UV acrylic finish. For maximum stability, lockers must be secured to the wall. Arrives fully assembled.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
The shelf has a collection trough running the length of the front of the shelf which serves the dual purpose.  When installed as a locker bottom, the trough will collect any water which may pool in the bottom of the shelf from melting snow on boots or other spills.  When installed as a locker shelf, the trough is ideal for containing pens, pencils, etc.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.

NOTE: Colors shown are as close to actual finishes as the printing process allows. Do not make your final color selection based on the color shade shown on this page. Penco Color Charts are available for a more accurate color match. Exposure to high humidity, chlorine salts, abrasive cleaners, germicidal cleaners and acids can damage the finish and will void the guarantee. For outdoor applications or other harsh environmental conditions, contact your Penco Representative.
Source 4 Industries is a trusted supplier for material handling equipment and a variety of associated industrial products. We have proven over 40 years that we can meet or exceed your commercial and industrial product needs. Please allow us the opportunity to show you how we distinguish ourselves from other suppliers through our commitment to service and supply. We keep product specialists on hand to answer your most perplexing questions, so give us a try and let us be the solution to your material handling and industrial supply requirements.
The company contacted me and told me how upset they were that the first set didn't work and offered to send me a set for free. They work great and are much bigger and stronger then the Masterlock set I bought. I'm going to order a two more sets to replace the masterlock set. Name brand isn't always worth the extra money. Well worth the buy and highly recommend.
At A Plus Warehouse, we make it our business to earn yours. We’re committed to providing you with a safe, simple ordering experience. Even if you know next to nothing about lockers, we still make it easy for you to place your order in less than 5 minutes. Once your order is on its way, your gym lockers are secure. We use plenty of interior and exterior packaging to minimize the possibility of damaged product. Compare our gym locker offerings to our competition and you will see that they want you to have a PHD in lockerese before handling your business. Feel free to contact us with any questions you may have.
Penco® Vanguard™ 7 & 8 Person Lockers are made of prime grade cold rolled steel with a powder coat finish for long lasting durability. 18" W x 12" H box lockers provide permanent storage of books, supplies, gear and equipment. Large 18" W x 60" H locker used for clothing storage (7 Person Lockers include one large locker and 7 box lockers; 8 Person Lockers include 2 large lockers and 8 box lockers). Welded door frames feature mortise and tenon construction for strength. 16 gauge steel doors are louvered for ventilation and use 5-knuckle hinges for increased strength. Large lockers with die-cast latching handle for quick and easy operation provide spring-loaded latch clips and 2 single prong coat hooks and a garment bar for wardrobe storage. Latch channels have unique nylon glides and latch hooks include rubber bumpers to reduce noise and offer quiet operation. Box lockers use padlockable friction hasp and latch for security (locks sold separately). Legs add 6" to height for overall 78" H. Easy assembly. Includes number plates; Note: specify number at time of order. Dimensions are 36" W x 18" D x 72" H, 36" W x 21" D x 72" H and 54" W x 18" D x 72" H. Openings are 8 and 10. Colors are Burgundy, Champagne, Gray and Marine Blue. 

Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Choose from an unlimited colors and sizes with a surplus of styles crafted for strength and durability in just about any environment or industry. Offices to warehouses and spas to police stations are sure to find the perfect clothing, gear or equipment storage among our wide offering of metal lockers. After our lockers are salvaged, they are carefully refurbished to work like new again and you will be surprisedto find that they still have plenty of function and shine left in them.
Lyon puts a recessed handle with finger lift ready for padlock attachment on these 2 tier metal lockers. These 2 door metal lockers have 6″ wide louvers for ventilation. The 6″ high legs raise locker bottom off the floor. Lyon stocks standard steel double tier lockers in either dove gray or putty powder coat finishes. Lyon makes their double tier standard steel lockers in the USA. They are also GREENGUARD certified. Looking for other standard steel lockers? Check out Lyon’s full line of standard steel lockers.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Half door and two person lockers use as much space as a single full door locker, but they are split into two units, which doubles the number of lockers overall. These are extremely popular because they are a nice middle ground between full door and box lockers. They provide a moderate amount of storage space while also being more efficient on overall space than full door lockers. Used half door lockers are one unit over the other, each unit being the same with as a full door locker. Two person lockers are two vertical units side by side, which are the same width as one full door locker as well. They also have two small shelves overhead for storage of small items.

ASI Storage Solutions® Traditional Single Tier Assembled Lockers have an extra heavy duty 2mm powder-coated finish to prevent corrosion. 16-gauge steel door, frames and bottoms and 24-gauge steel tops, sides, backs and shelves provide long-lasting durability. Features stainless steel recessed handle for safety. Rubber door silencers for quiet operation. Continuous full-length piano hinge and multi-point latch for ease of use and security. Legs add 6 inches to height. Available in Almond, Blue Frost, Burgundy, Gray, Mist Green and Black. Dimensions per model. One Year Limited Warranty.


Lockers are a specialty at A Plus Warehouse. No order is too small, and no order is too large! We know how useful the right storage equipment can be, which is why we provide a huge variety of lockers for any application you can imagine. Choose office lockers, school lockers—even high-security electronic access lockers! Whatever use you have for our lockers, we carry lockers for sale that meet your needs.
Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.
Choosing the right lockers for your school can be challenging, but Duralife Lockers make the decision easier. Constructed from HDPE, Duralife Lockers offer facility managers and school officials low maintenance, durability, and an aesthetically pleasing locker solution that outperforms traditional metal lockers. These lockers are ideal for elementary, middle school and high school lockers.
These steel storage lockers feature sturdy, boltless construction that assembles easily without the use of tools, just snap together. Boltless lockers offer the same strength and theft prevention as standard metal lockers. Quick assembly personal storage lockers feature one top and one bottom fixed height shelf for added storage space. Full width garment bar allows easy wardrobe storage. Doors feature a 2-point locking system with recessed locking handle and single prong hook. Bottom of locker door is louvered for ventilation. Powder coat finish.

Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Harvard Law School has a number of lockers lining the walls in the basement corridors that connect the main buildings on campus. They are distributed on a first come, first served basis to law school students living off campus (with the exception of North Hall). Students who live in law school dormitories, with the exception of North Hall, are not eligible for lockers. Please contact the Dean of Students Office with questions.
SCHOOL BOARD ELECTION Orion Community Unit School District #223 will have four (4) School Board seats to be filled at the April 2, 2019, Consolidated Election.  Candidates who are elected will fill four-year terms expiring in April 2023.Candidates for the office of School Board can begin to circulate nominating petitions for signatures beginning September 18, 2018.  The period for filing nominating papers runs from December 10 through December 17, 2018, at the Henry County Clerk's Office in Cambridge, Illinois.Additional information and petitions may be obtained at the Illinois Association of School Boards' website:  www.iasb.com/elections OR the Henry County Clerk's Office in Cambridge, Illinois (or their website:  www.henrycty.com) OR the State Board of Elections ...
Constructed of 16-Gauge steel Salsbury 61000 series single Constructed of 16-Gauge steel Salsbury 61000 series single tier metal lockers offer privacy and space for personal storage needs. Single tier metal lockers are available in a gray tan or blue powder coated finish and as unassembled or assembled units. These durable lockers are available in heights of 5 ft. ...  More + Product Details Close
×