Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.
ASI Group® Traditional Double Tier Ready To Assemble Lockers have an extra heavy duty 2mm powder-coated finish to prevent corrosion. 16-gauge steel doors, frames and bottoms and 24-gauge steel tops, sides, backs and shelves provide long-lasting durability. Features stainless steel recessed handle for safety. Rubber door silencers for quiet operation. Continuous full-length piano hinge and multi-point latch for ease of use and security. Legs add 6 inches to height. Available in Almond, Blue Frost, Burgundy, Gray, Mist Green and Black. Dimensions per model. One Year Limited Warranty.
Box lockers have the smallest amount of storage space, which also allows for maximum lockers in a limited space. These are great for small personal items like your wallet, cell phone, keys, jewelry, etc., as well as small tools, parts, or components. Because of the option to securely lock these units, employees can leave valuable belongings in them without fear of theft.
So I bought 6 locks at the same time, which arrived quickly. I followed the instructions to change the combination (not difficult, easy to read and understand, which I really appreciate, especially these days!) All but one easily changed combinations. (Even though I did the exact same process for each.) I emailed to ask if there was a way to reset the one, and they immediately sent out another two locks, which both worked just fine, with no questions asked! All locks still work fine to this day!
Standing 72'' tall and just 12'' wide, this single-tier locker brings space-conscious storage to bedrooms, break rooms, and beyond. This design is awash in a crisp white finish and sports brushed nickel hardware – including a convenient double hook for coats and bags. On the front, you’ll find a chrome-plated nameplate and latch (locks not included). This product comes backed by a five-year manufacturer warranty. To clean, simply wipe down with a damp cloth.
One thing that box lockers can’t do that nearly all other styles of lockers can (depending on their height) is hang garments. Box lockers allow for a maximum number of units in a small space, but are too small to hang your jacket. Garment lockers utilize box lockers, and a coat rod is mounted under the lockers between the vertical sections. This allows for employees to hang full length garments, while still being able to secure their other personal items in their individual lockers.
Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
Here is the perfect answer to restoring order to a child's bedroom or study area. The 1 Tiers 1 Wide Home Locker can be personalized with the name slot on the vented lockable doors. Rugged steel framing and sides. Shipped as a kit with 2 keys, 1 shelf's, and easy to follow assembly instructions. This makes a great project for both parent and child. Hint: This is a great gift idea for kids and grandchildren.
These HDPE plastic school lockers are actually more durable than metal ones because they’re impervious to dents. They’re even resistant to graffiti—the scourge of most lockers. A simple wipe or scrub will take care of the graffiti without having to repaint the entire locker. Duralife student lockers are also impermeable to moisture, preventing mold growth and unpleasant odors.
I needed to get a locker for my fiancee so he had something to store his belongings into at work. I was able to order this fairly easy and received it in the mail on the day it was due to arrive without any damage to it at all. Now why only four stars? I was not very happy with the finished product regarding the holes not lining up for the screws. I ended up having to tac weld the locker which I should not have done! Other than that it looks great, is sturdy, and does the job it is intended to do!
Penco Vanguard recessed handle storage lockers ensure secure, reliable and quiet use. Locker doors feature spot welding for rigidity and louvers for ventilation. Continuous door strike ensures secure closure. Door strikes feature rubber padding to dampen noise. Metal lockers have 5-knuckle hinges for strength. Latching channels have nylon glides to reduce sound during operation. Legs add 6" to height. These school lockers feature a stainless steel recessed handle that provides a smooth, catch-free front and protects padlocks. Single Tier Office Lockers have 3-point latching (top, bottom and sides). 18”D lockers include a coat hook and coat rod. Double and Triple Tier Employee Lockers have 2-point latching (top and bottom). Coat hook included. It's recommended to anchor storage lockers to floor and/or wall for safety. Powder coat finish. Assembled steel lockers are non-returnable.
Half door and two person lockers use as much space as a single full door locker, but they are split into two units, which doubles the number of lockers overall. These are extremely popular because they are a nice middle ground between full door and box lockers. They provide a moderate amount of storage space while also being more efficient on overall space than full door lockers. Used half door lockers are one unit over the other, each unit being the same with as a full door locker. Two person lockers are two vertical units side by side, which are the same width as one full door locker as well. They also have two small shelves overhead for storage of small items.

Vanguard lockers feature right-hand butt hinges recessed into the doorframe to prevent tampering and forced entry. Office lockers include tamper-proof chrome plated latching handles that provide smooth fingertip operation. Locker doors feature mortis and tenon construction with spot welding for rigidity. Continuous door strikes ensure secure closure; strikes are padded to dampen noise. Latching channels have nylon glides to reduce sound when opening or closing. Legs add 6" to height. Single Tier Storage Lockers have 3-point latching (top, bottom and sides); 18”D Lockers include coat hooks and coat rod. Double Tier and Triple Tier Employee Lockers have 2-point latching (top and bottom). Includes coat rod. Six Tier Box Lockers have friction latch and hasp (padlocks sold separately). 16 Person Lockers include sixteen 12”W x 18”D x 12”H compartments and a center coat rod. Recommended to anchor steel lockers to floor and/or wall for safety. Powder coat finish available in the following colors: Gray, Champagne, Marine Blue, or Burgundy.


Our complete line-up of open-front sport lockers is a collection of specialty lockers engineered for high school, collegiate and professional team organizations who demand high performance equipment storage solutions. Our Pro-Sport Twin-Frame all-welded open-front athletic lockers are designed to accommodate the storage of a wide variety of athletic gear and apparel while allowing maximum ventilation...


Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.):

Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.

Attractive, functional, durable, and easy to install! Maximize your space and keep students organized with I.D. Systems lockers. The Lockers 1 Tier 3 Wide Employee Locker are built to withstand the daily wear and tear and are guaranteed free of defects in materials and workmanship for up to five years. This triple wide locker with a shelf in each locker provides adequate space for storing personal belongings and school supplies. Each solid door opens to 180-degrees to keep doors from swinging...
Singapore Locker offers a full line of Metal Locker & Plastic ABS Locker for gyms, schools, workplaces, homes. We're here to help with your locker storage needs! Our customer service team has been dealing with locker for years. We are extremely knowledgeable about the Locker products we offer, and can assist you with everything from pricing large jobs, to Locker installation or even Locker Room Space Planning Singapore Locker extensive range of storage locker means you will the find the perfect locker solution right here at. The essential ingredient to an orderly structured office is to get the storage right.

Harvard Law School has a number of lockers lining the walls in the basement corridors that connect the main buildings on campus. They are distributed on a first come, first served basis to law school students living off campus (with the exception of North Hall). Students who live in law school dormitories, with the exception of North Hall, are not eligible for lockers. Please contact the Dean of Students Office with questions.
This website uses technical, analytical and third-party cookies, in order to send you advertisements in line with your preferences. For further information about cookies read our Terms of Use. By closing this message, scrolling this page or clicking on any of its elements you are giving your consent to the use of cookies for the purpose described above. X

Interloc is proudly an Australian company supplying and installing lockers Australia wide. Our lockers are also proudly made in Australia. Interloc has also an extremely long history as one of the constant innovators in locker design. Given the long history we have with locker design and locker installations, we have now the enviable position of having sales and installation services in all capital cities in Australia.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
NOTE: Colors shown are as close to actual finishes as the printing process allows. Do not make your final color selection based on the color shade shown on this page. Penco Color Charts are available for a more accurate color match. Exposure to high humidity, chlorine salts, abrasive cleaners, germicidal cleaners and acids can damage the finish and will void the guarantee. For outdoor applications or other harsh environmental conditions, contact your Penco Representative.

Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
I needed to get a locker for my fiancee so he had something to store his belongings into at work. I was able to order this fairly easy and received it in the mail on the day it was due to arrive without any damage to it at all. Now why only four stars? I was not very happy with the finished product regarding the holes not lining up for the screws. I ended up having to tac weld the locker which I should not have done! Other than that it looks great, is sturdy, and does the job it is intended to do!
Choosing the right lockers for your school can be challenging, but Duralife Lockers make the decision easier. Constructed from HDPE, Duralife Lockers offer facility managers and school officials low maintenance, durability, and an aesthetically pleasing locker solution that outperforms traditional metal lockers. These lockers are ideal for elementary, middle school and high school lockers.
Greet and store your kid’s belongings in the morning with this 5 Wide Kids Locker. The locker is equipped with four kid-sized sections that feature two double pronged locker hooks in the middle. Great for storing the backpacks, jackets or the favorite costumes! Additionally, there are 2 smaller cubbies above and below each section for the lunchboxes and shoes. The open layout provides easy access to the belongings and the natural finish is perfect for any classroom or home décor. Constructed...
×