Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.

I have 4 kids under age 5 and was constantly bothered by their coats and shoes being lost all over the house. This has been fantastic for organizing all their hats, gloves, shoes, boots, coats, jackets, backpacks, etc. It has held up very well despite being packed with more than I ever expected to fit in it. The kids know as soon as they walk in the door to go hang up their coats and backpacks and to put their shoes in their cubbies. I anticipate being able to use this for at least 10 years to come. It's incredibly sturdy and well-made. My husband assembled it in less than an hour and the directions were very clear.


Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
Don’t forget to check out our used lockers for sale either. These are really quite a deal. We scour the country finding the best used school lockers as well as office, industrial, gym, and sports styles. By acquiring these in bulk we can offer you a better price. Need more than just a few frames? No problem, we carry hundreds of the same style so you can order as many, or as few, as you need for your project. Each locker is carefully inspected, repaired, and brought up to its best condition possible before being shipped out to you fully assembled so you can put it to use right away.

When it comes to Athletic lockers, we have all the bases coverd. Gym lockers, team lockers, and athletic lockers, find it all here. From our Recruiter Open-Front wood sport locker to all welded Champ Athletic lockers, we got you and your sports team covered. Ventilated, welded, KD, wood, or whatever... Choose from high-security turn handles or sleet stainless recessed handles, Box lockers to conserve space or wardrobe lockers to hang full-length garments. whatever you need, you can be sure we have it!
Hallowell Assembled Premium Steel Lockers have louvered steel doors with stainless steel recessed handle and fingertip lift lever for easy opening. Smooth front profile of the recessed handle prevents catching and banging. Locker handle also includes an integral padlock hasp that shelters lock shackle to discourage tampering. Single Tier Lockers include hat shelf; DoubleTier Lockers include ceiling hook and two wall hooks; and Triple Tier Lockers include ceiling hook. 5 Tier, 6 Tier, 16 Person and 4 Person Wall Lockers have friction latch and hasp closure. All premium gym lockers are painted inside and out with powder coat finish. Legs add 6" to height. Metal storage lockers include a number plate. These office lockers are available in Black, Black/Light Gray, Black/Red, Blue, Gray, Green Mist, Maroon and Parchment. Dimensions vary per model.
How custom? Our dedicated Research and Development team, project engineers, and CAD designers will help you select the unique amenities your space needs and your members want, like smart locks, USB connections, trend lighting, customizable graphics, shoe drawers, mirrors, and so much more. Updated locker rooms can actually help encourage people to join your club, helping you hit those membership numbers.
Convenient storage space, plus a bench for children to sit while putting on shoes or boots! Constructed with all-birch veneer panels with dado construction for added strength and durability, and screw block reinforced top panels. Unit is protected with 4 coats of environmentally friendly, chemical and stain resistant, UV acrylic finish. For maximum stability, lockers must be secured to the wall. Arrives fully assembled.
ALB Plus All-Welded Steel Lockers are made from steel for lasting durability and reliable service. Doors close quietly for reduced noise in busy hallways and aisles. Metal lockers have 5-knuckle hinges for strength. Recessed handle accepts padlock for security. Coat hooks included on Single-, Double- and Triple-Tier lockers. Archette and Six-Tier box lockers have friction latch padlock hasp for security. Archette also has a lower bar for hanging coats and clothing. Several locker styles available with Recessed Base, Sloped Top or Both to meet storage needs. Color finish is Light Gray. Dimensions vary per model.
My daughters have been excited for months to get this new Babymouse book. The only downside to its arrival was discovering is that it's actually the beginning to a whole new crossover early chapter book style Babymouse and not a full graphic novel. It has occasional graphic novel style sections but is primarily words. One of my daughters was fine with the change. The other was heartbroken since she loves the original 20 books (and has read them all too many times to have kept track).
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
Used lockers are available in a variety of styles from American Surplus. We typically stock used box lockers, full door lockers, garment lockers, and half door lockers. ASI currently has large quantities of lockers in stock and we have all styles to suit your various storage needs. Our used lockers are in great condition, and are inspected for damage and wear prior to shipment.
Standard 4-, 5-, 6-, 8- and 9 tier box locker doors have a padlock hasp and a friction catch. Available at extra cost is a spring-loaded catch. Both 2- & 3 tier lockers have horizontal frame members welded between the doors for added strength and security. 24” wide lockers have full width doors. If slope tops are required, use hoods. All Invincible II lockers accept built-in locks or padlocks and have rubber bumpers on the latch hooks to reduce noise.
After much research, we keep the most popular color options in stock and ready to ship to you immediately from one of our multiple distribution centers throughout the US. If our “quick ship” selection doesn’t quite fulfill your needs, just let us know. We can produce and supply lockers in any requested size, colors and in every design imaginable with a little time to custom make them.
Our powder coated baked enamel finish is tough and available in all standard colors. Body parts are finished using the same color as the doors, as standard. For quieter operation, each latch hook features a noise reducing rubber bumper. The welded doorframes utilize mortis and tenon joints and are spot welded for lifetime rigidity. Every door has a continuous door strike. All hinges are full loop, 5-knuckle design for knocked down construction and c-hinge for welded construction.
×