Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.


Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
I purchased these lockers for my husbands engineering office. Several of the men do field work and when they are in the office their STUFF is all over the place. The lockers depth of 18" is plenty wide to accommodate a regular clothes hanger without crowding or having to force it in. It will hold a jacket or rain gear, steel toe or rubber boots as well as a tool belt or small tool kit.
After initial review, I was contacted by seller. They were very concerned about my issue with one of the locks. They promptly sent me a replacement TWO PACK (although I had a problem with only one lock). Both locks sent work perfectly. Well done! Excellent customer response and resolution. I am now very happy, and would highly recommend this product!!!
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

One thing that box lockers can’t do that nearly all other styles of lockers can (depending on their height) is hang garments. Box lockers allow for a maximum number of units in a small space, but are too small to hang your jacket. Garment lockers utilize box lockers, and a coat rod is mounted under the lockers between the vertical sections. This allows for employees to hang full length garments, while still being able to secure their other personal items in their individual lockers.
Interloc is proudly an Australian company supplying and installing lockers Australia wide. Our lockers are also proudly made in Australia. Interloc has also an extremely long history as one of the constant innovators in locker design. Given the long history we have with locker design and locker installations, we have now the enviable position of having sales and installation services in all capital cities in Australia.

Large Variety Whether you're looking for vintage, modern, or anything in between for storage, we've got used lockers for you. We specialize in discount used lockers that can be utilized for employees at work, military personnel, students at school, or personal use at home for adults and kids. We have an array of materials to choose from including metal, wood, and steel for whatever you need to purchase. We've got used lockers for every occasion from football gym room lockers to industrial work benches. Want more colors than just standard grey or red? We provide a plethora of custom colors to truly personalize your product.
While Duralife Lockers® are known for their uncompromising durability and security, they also come in a variety of design options where you can tailor your ideal locker corridor. These education lockers come with arc venting to provide the necessary airflow, and the interior can come with two different coat hook options (metal J-hook or Double Prong Black Coat Hook). You even get to choose your tops and trims with slope or flat options. Lastly, you get to choose from a variety of filler widths to tailor your facility’s lock arrangements and configurations.

When it comes to fitness centers, they’re constantly changing, which means the locker room must also adapt to what’s trendy. Over the years, we’ve outfitted locker rooms for traditional weightlifting gyms, spin gyms, climbing gyms, pilates and yoga studios, and even trampoline parks. When it comes to gym locker trends, we know what’s popular and what’s needed.


Founded in 1976, Hollman, Inc. is the industry leader in locker design and solutions.  We have manufactured more than two million lockers for high-profile organizations, including the NFL, NBA, MLB, NHL, major American golf courses, corporate centers, country clubs, fitness studios and gyms, college campuses, museums, and hospitals. Our lockers are built to inspire teamwork, collaboration, innovation, and trust among the users.


Our complete line-up of open-front sport lockers is a collection of specialty lockers engineered for high school, collegiate and professional team organizations who demand high performance equipment storage solutions. Our Pro-Sport Twin-Frame all-welded open-front athletic lockers are designed to accommodate the storage of a wide variety of athletic gear and apparel while allowing maximum ventilation...


Choose from an unlimited colors and sizes with a surplus of styles crafted for strength and durability in just about any environment or industry. Offices to warehouses and spas to police stations are sure to find the perfect clothing, gear or equipment storage among our wide offering of metal lockers. After our lockers are salvaged, they are carefully refurbished to work like new again and you will be surprisedto find that they still have plenty of function and shine left in them.
Though our ventilated and athletic lockers fill the needs of many organizations out there, we know that there are facilities and areas that require something a little different. If this is the case for your locker room or gym, then we have the solution that you need. By offering custom gym lockers, you are guaranteed to not only get the lockers you need, but the lockers that you want as well. Rather than be restricted to certain door styles, latch options, and colors, the sky is the limit with our custom units. With videos and installation guides to help you each step of the way, your ideal lockers are just a few clicks or a phone call away.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Fully-Assembled, Fully-Loaded and ready to use right out of the box! Ready-Built II lockers ship complete slope tops, closed metal base and include a master-keyed controlled combination padlock for each locker door so lockers are ready to use the minute they arrive. Our multi-point gravity lift-type latching for wardrobe lockers assures a secure locker while box lockers offer a simple thru-the-door finger pull single-point latch. All doors are louvered for ventialtion and include a...
As stated above, many of our discount lockers are actually still brand new. Each locker description includes whether the locker is new overstock, surplus, or a scratch/dent model to help you make the best decision possible. Scratches and dents are purely cosmetic in nature, the functionality and durability of the locker is never compromised, but we give a discount to make up for any minor imperfections. Overstocks and surplus are typically styles/colors that have been discontinued. They are still brand new, never used, but with a discount so we can make room for new inventory. Styles range from single tier lockers with one door to box lockers with up to 6 doors on one locker frame.
The Pro Collection is specifically designed for applications that require easy access to uniforms and equipment. Select the configuration that best suits your needs by adding a lockable security box and/or a footlocker with a reinforced top that doubles as a seat. The open front and perforated sides allow for full ventilation, with a large dedicated storage area.

Gr 3–5—The Holms, the brother/sister team behind the graphic novel series "Squish" and "Babymouse," continue Babymouse's adventures, taking her into middle school. Much like Lincoln Peirce's "Big Nate" crossover chapter books, this new series will appeal to readers looking for slightly more challenging fare. Though this title contains more text than the original "Babymouse" books, there are numerous illustrations throughout, the font is large, and the difficulty of the language is comparable to that of previous books, making it ideal for fans crossing over into longer chapter book territory. Babymouse is just as energetic as ever, but now she's dealing with middle school drama and algebra. She doesn't want to fit in anymore—she wants to stand out! Babymouse finds the perfect opportunity in film club, where she is chosen to write and direct a movie inspired by her favorite epic dramas. She realizes that it's not as easy as she thought, with a diva leading actress and no budget. Ultimately, Babymouse learns that working as a team is more important than being a star. VERDICT A first purchase where the graphic novel series is popular. For fans of "Dork Diaries" and "Diary of a Wimpy Kid."—Jessica Ko, Los Angeles Public Library
Founded in 1976, Hollman, Inc. is the industry leader in locker design and solutions.  We have manufactured more than two million lockers for high-profile organizations, including the NFL, NBA, MLB, NHL, major American golf courses, corporate centers, country clubs, fitness studios and gyms, college campuses, museums, and hospitals. Our lockers are built to inspire teamwork, collaboration, innovation, and trust among the users.
Other Lockers and storage units: Our modular lockers offer storage alternatives and can be ordered with either a metal or window door. Our storage lockers are highly customizable and in use in many retail stores and as general lockable storage for other facilities. Basket lockers are an excellent addition to industrial settings, factories, garages and recreational facilities. For a larger storage area, check out our storage cabinets available in both full height and counter height models as well as standard and heavy duty models and our welded storage cabinets. By popular demand, we have also added a variety of cell phone lockers to our product offerings. Wall mounted lockers are a great choice for eye-level or overhead storage or when limited ground space is available.
Lyon puts a recessed handle with finger lift ready for padlock attachment on these 2 tier metal lockers. These 2 door metal lockers have 6″ wide louvers for ventilation. The 6″ high legs raise locker bottom off the floor. Lyon stocks standard steel double tier lockers in either dove gray or putty powder coat finishes. Lyon makes their double tier standard steel lockers in the USA. They are also GREENGUARD certified. Looking for other standard steel lockers? Check out Lyon’s full line of standard steel lockers.
Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
NOTE: Colors shown are as close to actual finishes as the printing process allows. Do not make your final color selection based on the color shade shown on this page. Penco Color Charts are available for a more accurate color match. Exposure to high humidity, chlorine salts, abrasive cleaners, germicidal cleaners and acids can damage the finish and will void the guarantee. For outdoor applications or other harsh environmental conditions, contact your Penco Representative.

Our complete line-up of open-front sport lockers is a collection of specialty lockers engineered for high school, collegiate and professional team organizations who demand high performance equipment storage solutions. Our Pro-Sport Twin-Frame all-welded open-front athletic lockers are designed to accommodate the storage of a wide variety of athletic gear and apparel while allowing maximum ventilation...
Lockers is a new information and education resource. It assists schools in coping with and preventing the sharing of explicit self-generated images of minors. Intended for use with Junior Cycle SPHE classes, Lockers is supported by a newly developed animation and six lesson plans. Also included in Lockers is an information section for school leaders.

Lockers

×