Lyon puts a recessed handle with finger lift ready for padlock attachment on these 2 tier metal lockers. These 2 door metal lockers have 6″ wide louvers for ventilation. The 6″ high legs raise locker bottom off the floor. Lyon stocks standard steel double tier lockers in either dove gray or putty powder coat finishes. Lyon makes their double tier standard steel lockers in the USA. They are also GREENGUARD certified. Looking for other standard steel lockers? Check out Lyon’s full line of standard steel lockers.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
After initial review, I was contacted by seller. They were very concerned about my issue with one of the locks. They promptly sent me a replacement TWO PACK (although I had a problem with only one lock). Both locks sent work perfectly. Well done! Excellent customer response and resolution. I am now very happy, and would highly recommend this product!!!
One thing that box lockers can’t do that nearly all other styles of lockers can (depending on their height) is hang garments. Box lockers allow for a maximum number of units in a small space, but are too small to hang your jacket. Garment lockers utilize box lockers, and a coat rod is mounted under the lockers between the vertical sections. This allows for employees to hang full length garments, while still being able to secure their other personal items in their individual lockers.
Assembled Paramount® Steel Lockers are made with 16 gauge steel doors, 5-knuckle security hinges and welded, reinforced frame-and-door assemblies for maximum security and long lasting durability. Locker doors have extra wide louvers to promote ventilation. Legs add 6" to height. Available colors are Blue, Tan and Gray. These metal lockers include blank number plates. Steel lockers feature finished sides; no need for decorative end panels. Optional locks, numbered plate kits and bases sold separately. Assembled lockers are not returnable.
They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
Penco storage lockers ensure secure, reliable and quiet operation. These steel lockers feature a tamper-proof chrome plated lathing pull handle that offers smooth one-handed fingertip operation. Metal storage lockers include right-hand butt hinges recessed into the doorframe to prevent forceful entry or tampering. Locker doors feature mortis and tenon construction with spot welding for rigidity. Continuous door strike ensures secure closure. Door strikes are padded to dampen noise. Latching channels have nylon glides to reduce sound when opening or closing. Legs add 6" to height. Single Tier School Lockers have 3-point latching (top, bottom and sides); 18”D Lockers include coat hooks and coat rod. Double Tier and Triple Tier Storage Lockers have 2-point latching (top and bottom) Includes coat hook. Two Person Lockers include coat rod on 18” and 21” deep lockers; Coat hooks on 15”deep. Lower door controls operation of one 9-1/2”H upper compartment. Six Tier Box Lockers have friction latch and hasp (padlocks sold separately). 16 Person Lockers include sixteen 12”W x 18”D x 12”H compartments and a center coat rod. It's recommended to anchor lockers to floor and/or wall for safety. Powder coat finish available in the following colors: Gray, Champagne, Marine Blue, or Burgundy.
Here is the perfect answer to restoring order to a child's bedroom or study area. The 1 Tiers 1 Wide Home Locker can be personalized with the name slot on the vented lockable doors. Rugged steel framing and sides. Shipped as a kit with 2 keys, 1 shelf's, and easy to follow assembly instructions. This makes a great project for both parent and child. Hint: This is a great gift idea for kids and grandchildren.

Buy Gym Locker

×