Half door and two person lockers use as much space as a single full door locker, but they are split into two units, which doubles the number of lockers overall. These are extremely popular because they are a nice middle ground between full door and box lockers. They provide a moderate amount of storage space while also being more efficient on overall space than full door lockers. Used half door lockers are one unit over the other, each unit being the same with as a full door locker. Two person lockers are two vertical units side by side, which are the same width as one full door locker as well. They also have two small shelves overhead for storage of small items.

Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.


ASI Storage Solutions® Traditional Triple Tier And Above Assembled Lockers have an extra heavy duty 2mm powder-coated finish to prevent corrosion. 16-gauge steel doors, frames and bottoms and 24-gauge steel tops, sides, backs and shelves provide long-lasting durability. Features stainless steel recessed handle for safety. Rubber door silencers for quiet operation. Continuous full-length piano hinge and multi-point latch for ease of use and security. Legs add 6 inches to height. Available in Almond, Blue Frost, Burgundy, Gray, Mist Green and Black. Dimensions per model. One Year Limited Warranty.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Penco school lockers feature a stainless steel recessed handle that provides a smooth, catch-free front and protects padlocks from being tampered with. Locker doors feature spot welding for rigidity. Doors are louvered for ventilation. Office storage lockers include continuous door strikes to ensure secure closure and rubber padding to dampen closing noise. Metal lockers have 5-knuckle hinges for strength. Latching channels have nylon glides to reduce sound when opening or closing. Legs add 6" to height. Single Tier Office Lockers have 3-point latching (top, bottom and sides). 18”D lockers include coat hooks and a coat rod. Double and Triple Tier Employee Lockers have 2-point latching (top and bottom). Includes coat hook. It's recommended to anchor steel lockers to floor and/or wall for safety. Powder coat finish.
For over 16 years we have been selling lockers of all kinds by all the top trusted brands, including Hallowell, Tennsco, Penco, Pucel, Sandusky, Edsal, and Republic. Chosen by offices, schools, and warehouses nationwide, we at A Plus Warehouse stand by these brands and their commitment to quality. We choose to carry their lockers because we know they can be depended on.

Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Lockers is a new information and education resource. It assists schools in coping with and preventing the sharing of explicit self-generated images of minors. Intended for use with Junior Cycle SPHE classes, Lockers is supported by a newly developed animation and six lesson plans. Also included in Lockers is an information section for school leaders.
Get maximum storage in a minimal footprint with ECR4Kids Birch Streamline 3 Section Coat Locker with Bench. This durable birch hardwood coat locker is a great place for kids to store their book bags, coats, lunch boxes and more. The attractive natural finish complements classrooms, preschools, bedrooms, daycares, and homes for an all-around storage solution. Spacious cubbies give kids plenty of storage options for binders and other school supplies.
Our Promise Our staff is not only dedicated to providing you with cheap, second hand lockers, we are also dedicated to providing you with friendly customer service from the beginning of your buying process all the way to its delivery. We guarantee we have the best used lockers for sale and our projects speak to that. We have multiple satisfied clients whether we were installing athletic sport lockers for a high school or wooden cube lockers for ski lodges. We value building that trust with our clients to where they know we'll deliver quality products and installs.
Our powder coated baked enamel finish is tough and available in all standard colors. Body parts are finished using the same color as the doors, as standard. For quieter operation, each latch hook features a noise reducing rubber bumper. The welded doorframes utilize mortis and tenon joints and are spot welded for lifetime rigidity. Every door has a continuous door strike. All hinges are full loop, 5-knuckle design for knocked down construction and c-hinge for welded construction.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Our powder coated baked enamel finish is tough and available in all standard colors. Body parts are finished using the same color as the doors, as standard. For quieter operation, each latch hook features a noise reducing rubber bumper. The welded doorframes utilize mortis and tenon joints and are spot welded for lifetime rigidity. Every door has a continuous door strike. All hinges are full loop, 5-knuckle design for knocked down construction and c-hinge for welded construction.
×